JND Packaging
Our commission is to bring value-added packaging solutions to valuable consumers worldwide.
Add to Cart
Durable Smooth Dispensing Plastic Bottle with Pump Custom Label and Color available
♦Product Description:
Experience convenience and quality with the JND Durable Smooth Dispensing Plastic Bottle with Pump. Designed for effortless use, this bottle ensures smooth and consistent dispensing, making it ideal for toothpaste or other pastes. Crafted from high-quality plastic, it offers long-lasting durability and reliability. Custom labels and color options are available to match your brand’s unique style. Perfect for both personal care and commercial use.
♦Product Specification:
A. Primary Specification Properties
1. Material
| MATERIAL | MATERIAL DESIGNATION NAME | ALTERNATE MATERIALS |
| Base Material | Dispenser: 1. Spring: TPE 2. Piston: PE 3. Others: PP | N/A |
| Masterbatch | Standard white or customization | N/A |
1. General
1.1 Inspection condition Lighter: D65 Distance: 30CM visual
| Item | Description | Specification | |
| 1 | Overall Height | 75ml | 150.0±0.80mm |
| 100ml | 183.0±0.80mm | ||
| 2 | Weight of dispenser (without Piston) | 75ml | 36.8g±2.0g |
| 100ml | 40.5g±2.0g | ||
| 3 | Weight of piston | 2.8g±0.2g | |
| 4 | Over cap diameter | 39.60±0.40mm | |
| 5 | Inner diameter of body | 37.60±0.15mm | |
| 6 | Upper diameter of piston | 37.95±0.15mm | |
| 7 | Weight of labels | TBD | |
| 8 | Weight of sleeves | TBD | |
|
Weight is excluding the sealing foil on the body | |||
1.2 Drawing
B. Additional requirements
1.2 Must be free of dirt, grease, oils, or other foreign materials.
1.3 Parts must be free of flash, short shots, sink or other imperfections that may affect functionality of the part or has potential to cause injury.
2. Function test
2.1 Vacuum leakage test
After filling with toothpaste, put the finish part with holding pressure u-0.03MPa, 10 minutes". The result is ok if there is no leakage
2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The result is ok if there is no crack on the body.
3. Decoration
2) Printing color tolerance: AEab* M3.5
2) Printing color tolerance: AEab* <3.5
C. Markings
c. Manufacturing date
d. Lot number
e. Order number
2.2 Or use the customization mark according to Customer
D. Storage Requirements
The products must be stored upon receipt from the supplier within the original closed container, in a clean dry, well-aired store, away from direct sunlight, humidity and sources of contamination or foreign door and insect.
E. Certificate of Analysis
•Manufactured date, lot number, quantity , materials
•Includes measured visual inspection, key function test, and critical dimension measurement result.