Add to Cart
Airtight Seal Tamper-evident Cap effervescent tablets tube Eco-friendly Packaging
1. Product Description
JND introduces its innovative effervescent tablets tube, designed for modern health-conscious consumers. This tube features an airtight seal to preserve tablet potency and freshness, while the tamper-evident lid ensures product integrity and safety. Crafted from sustainable materials, the eco-friendly packaging aligns with JND’s commitment to reducing environmental impact without compromising on quality. Perfect for on-the-go lifestyles, this tube combines functionality, security, and eco-responsibility—all under the trusted JND brand. Stay healthy, stay sustainable.
2. Product Specification
♦Materials Quality:
| Parts | Tube Body | Cap |
| Color | Customized | Customized |
♦Specifications:
As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
| Type | No. | Item | Specifications | Inspection method | AQL Type | |
| Molding
| 1
| Appearance |
| Visual | Light | |
|
| 2 | Peculiar smell | No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample | Smell | Main | |
|
| 3 | ￠29*84 | Diameter | 29.0±1.0mm | caliper | Main |
|
|
|
| Height | 84.0±1.0mm | Height gauge | Main |
|
|
|
| Wall Thickness | 1.0±0.4mm | Caliper | Main |
|
| 4 | ￠29 Spiral Cap | Diameter | 28.0±0.8mm | caliper | Main |
|
|
|
| Height | 33.0±1.0mm | Height gauge | Main |
| Function | 1 | Sealing Property | Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. | Visual | Main | |
|
| 2 | Drop Property | Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. | Visual | Main | |
|
| 3 | Thermo stability | Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured | Visual | Main | |
| | 1 | Drawing | Color, Picture and Words same as standard sample | According to standard sample | Key | |
|
| 2 | Appearance | The appearance of the printed product is clean no soiling and deformity refer to standard sample | Visual | Light | |
|
| 3 | Peel Strength | Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. | Tape test | Main | |
♦Storage:
keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
Need to pad higher, away from the ground and wall 10cm above. no pressure.
3. Company Profile
4. Our Clients
